How to measure
Provide the venue point plan, outside diameter, segment and profile information, suspension positions, trim height, hoists, bridles, every load and position, stage orientation, access and installation schedule.
Support & suspension · circular truss guide
Flown Circular Truss Malaysia.
Circular production truss suspended from approved venue points using a coordinated hoist, bridle, load and installation plan.
What the structure achieves
Define the complete circular outcome.
A flown circle is an overhead production structure whose response depends on diameter, profile, orientation, number and spacing of suspension points and the complete distribution of equipment and decoration.
The closest system guide is Flown Production Truss Grid. The relationship helps establish the correct setup route; it does not make different circle profiles, segment systems or connectors interchangeable.
Diameter and size guide
Common enquiry geometry.
2–3 m flown featureEarly setup reference; actual system and availability require confirmation.
5 m ballroom circleEarly setup reference; actual system and availability require confirmation.
6–10 m production ringEarly setup reference; actual system and availability require confirmation.
Large venue-specific circleEarly setup reference; actual system and availability require confirmation.
Label these separately
- Outside diameter or radius
- Required clear inside diameter
- Profile depth and orientation
- Segment count and included angles
- Trim height and vertical envelope
- Support, suspension and total footprint
Circular design
Geometry, equipment and audience belong on one drawing.
Locate suspension and production loads with the approved venue point geometry. A visually even circle can still have an uneven structural load if fixtures, screens or décor cluster on one side.
Manufactured geometry
Profile, diameter, segments, angles, cutting and connection system are identified.
Complete load path
Venue points, hoists, towers, bases, legs or ground support are mapped.
Installed positions
Lighting, LED, scenic, signs, décor, cables and hardware use verified data.
Clearance and access
Audience, stage, camera, service and installation zones remain usable.
Suitable applications
Where flown circular truss fits.
Arena lighting rings
Diameter, support method, loads and event clearances are matched to the actual project.
Ballroom centrepieces
Diameter, support method, loads and event clearances are matched to the actual project.
Concert halos
Diameter, support method, loads and event clearances are matched to the actual project.
Exhibition circles
Diameter, support method, loads and event clearances are matched to the actual project.
Broadcast productions
Diameter, support method, loads and event clearances are matched to the actual project.
Awards shows
Diameter, support method, loads and event clearances are matched to the actual project.
When to choose another geometry
A venue ceiling, previous event photograph or assumed symmetrical load does not approve a flown circular structure.
Approximate Malaysia range
RM 4,000–RM 20,000+
Non-binding budget for early setup. A quote confirms the exact circle or curve, truss system, connections, supports or suspension, hardware, crew, delivery and event scope.
Setup reference · September 2026
What changes the price
- Diameter, radius, angle and total curve length
- Truss profile, segment count and availability
- Ground support, legs, towers or venue rigging
- Hoists, hardware and access equipment
- Lighting, LED, scenic, branding and décor
- Trim height and installation method
- Indoor venue or outdoor site conditions
- Transport volume, labour and rental duration
Circular-structure brief
Ten facts before quotation.
01Event purpose and central focal point
02Outside diameter, radius or included angle
03Required clear inside opening
04Exact profile and segment information if known
05Support or approved suspension positions
06Every applied item, weight and position
07Trim height and total vertical envelope
08Stage, screen, tables and audience layout
09Venue access or outdoor ground and weather
10Erection, loading, rehearsal and dismantling schedule
Circular load boundary
A circle is not a straight span bent into shape.
Map the complete load path into approved venue points, towers, legs, bases, ballast, ground or floor. Support and suspension positions around a circle are not chosen by visual symmetry alone.
Coordinate the production and venue or local rigging teams, assemble and load at working height where practical, conduct controlled lifting and inspect the complete system at trim.
Manufacturer circular-truss data can depend on diameter, profile, orientation, suspension count and load distribution. Final suitability must be checked for the exact system and arrangement.
Review manufacturer circle guidance ↗Why CK Event Management
Circular geometry planned in the full production context.
01
Correct measurement
Outside diameter, clear opening, profile and segment information are separated.
02
Complete event layout
Stage, lighting, LED, décor, audience, camera and access share one plan.
03
Support clarity
Ground-supported and flown concepts follow different load paths and venue needs.
04
Setup lifecycle
Delivery, assembly, loading, inspection, handover and dismantling can be coordinated.
Circular structure questions
Flown Circular Truss FAQ.
What sizes are available for flown circular truss?
Common enquiry references include 2–3 m flown feature, 5 m ballroom circle, 6–10 m production ring, Large venue-specific circle. Exact diameter, radius, included angle, profile, segment count, connection and availability are confirmed for the project.
How much does flown circular truss cost?
Use RM 4,000–RM 20,000+ as an early Malaysia setup range. The quote depends on circle or arc geometry, support or suspension, equipment, decoration, hoists, venue, crew, access, transport and duration.
How should the circular truss be measured?
Provide the venue point plan, outside diameter, segment and profile information, suspension positions, trim height, hoists, bridles, every load and position, stage orientation, access and installation schedule.
Can lighting, LED, flowers or signs be attached?
Only declared items included in the complete load and attachment review should be added. Provide exact models or fabrication data, installed weights, positions and proposed hardware.
Can this circular structure be used outdoors?
Outdoor use requires review of ground, bases or towers, ballast or foundations, exposed equipment and surfaces, weather conditions, monitoring and the operating response.
Does the webpage confirm CK stock or structural capacity?
No. Website sizes explain enquiry formats. The written quotation confirms the actual compatible system and availability; final suitability follows the exact project data and required technical review.
Related circular structures
Compare another ring, arc or 360° solution.
01
02
Ground-Supported Circular Truss
Circular truss carried by floor or ground-supported towers, legs or a complete support system where approved venue suspension is unavailable.
Explore setup →02Circular Roof Truss System
Project-assessed circular temporary roof structure for central stages, pavilions, hospitality or performance areas with radial production positions.
Explore setup →03Circular Lighting Truss Ring
Circular truss configured as an overhead or supported lighting ring for stages, ballrooms, exhibitions and immersive events.
Explore setup →04Concentric Circular Truss Rings
Two or more circular truss rings arranged at shared or offset centres for layered lighting, scenic and immersive overhead compositions.
Explore setup →05Semicircle & Arc Truss
Factory-made curved truss segments assembled as a half-circle, partial arc or curved scenic line for stages, entrances and displays.
Explore setup →06Curved Stage Portal Truss
Curved or arched truss framing around a stage, screen or scenic focal point for concerts, launches, awards and wedding productions.
Explore setup →